PS ENGINEERING PMA 7000M INTERCOM MONO INTELLIVOX MARKER UNIT ONLY
Part #: 050-781-0604
0507810604
compare
Overview
| While the PMA7000M is a mono intercom system, it does have our renown 6-place IntelliVox® automatic Voice Operated Relay (VOX) intercom system. Adjusting a squelch circuit is a thing of the past. And with over 18 years of field experience, find out just how easy it is to forget you are even using an intercom, it just works! No more clipping or missed syllables.
And the Bluetooth(R) Interface does allow music streaming as well as interconnect to an iPhone, iPad, iPod, or any other Bluetooth(R) enabled device that has the Handsfree or A2D2 profile. The PMA7000M provide 3-com capability with the option to easily convert Com 3 to a full duplex cellular telephone interface. It also has our pioneered “Split Mode”. This allows the pilot to be on Com 1 while the copilot is on Com 2, freeing up the pilot to work with ATC while the copilot gets weather information or finds out just where the lowest fuel cost is on the field while still in the air. The only knob that is on the panel is a concentric volume control for the Crew and Passengers intercom volume. The all push button controls of the PMA7000B allows for easy selection of Coms and other Nav aids. The PMA7000M is a direct slide-in replace to the PMA6000 series as well as UPS-AT SL-10M. This means that all that is required to replace your old audio panel with this brand new panel is a 3/32 Allen Wrench! |
| Weight | 1.5 lbs |
|---|---|
| Dimensions | 6.8 × 6.25 × 1.3 in |
| Brands |
SPECIFICATIONS
| MARKER BEACON: | C35d, Class A | AUDIO SELECTOR/ INTERCOM: | C50c, Class A |
| APPLICABLE DOCUMENTS: | RTCA/DO-214 RTCA/DO-143 RTCA/DO-160C RTCA/DO-178BENVIRONMENTAL | QUALIFICATIONS: | A1D1/CA(MN)XXXXXXBBBBTBKXX |
| OPERATING TEMPERATURE RANGE: | -15º C to 55ºC | VOLTAGE: | 11 to 33 VDC |
| ALTITUDE: | Up to 50,000 feet in an non-pressurized area | INPUT ISOLATION: | 60 dB (min.) |
| WEIGHT WITH RACK & CONNECTORS: | 1.5 lb. (0.54 kg) | AUDIO SELECTOR PANEL IMPEDANCE: | Input-510 Ω |
| UNSWITCHED INPUTS: | 4 | TRANSMITTER SELECTIONS: | 5 (Com 1, Com 2, Com 3 Com1/2, Com1/3) |
| HEADPHONE IMPEDANCE: | 150 – 1000 Ω | HEADPHONE OUTPUT: | 38 mW each headset, no clipping <1% THD |
| SPEAKER IMPEDANCE: | 4 Ω | MICROPHONE IMPEDANCE: | 150 – 600 Ω |
| INTERCOM POSITION: | 6 places (with individual IntelliVox® circuits) | MUSIC INPUTS: | 2, (Independent, Stereo) |
| MUSIC MUTING: | >-30 dB “Soft Mute” when Com or intercom active | DISTORTION: | <1% THD @ 38 mW into 150 |
| MIC FREQ. RESPONSE | 3dB, 20 Hz – 18kHz | FREQUENCY: | 75 MHz Crystal Controlled |
| SENSITIVITY LOW/HIGH: | Capable of: (preset at factory for field application) 1000 Volts (Hard) (360 to 570 V soft) 200 Volts (Hard) (130 to 200 V soft) | SELECTIVITY: | -6 dB at ±10 kHz -40 dB at ±120 kHz |
| EXTERNAL LAMP OUTPUT: | 7.5 (±4 VDC unloaded, at maximum brightness) VDC positive when active, max. current 125 mA | MM SENSE: | Active high (4.5 ± 1.0VDC) |
| MAXIMUM CURRENT: | 2.5 Amp (Externally protected by a 3A pull-type breaker | DIMENSIONS: | Height: 1.3 in. (3.3 cm) Width: 6.25 in. (15.9 cm) Depth: 6.8 in. (17.3 cm) |
Features
- IntelliVox® automatic VOX system with individually gated microphones
- 6 – Place hi-fi mono intercom with Soft Mute™
- 2 – music mute modes: Mute On and Mute Off
- Built-in Marker Beacon Receiver
- Split mode for dual audio panel capability
- 2 hi-fidelity mono music source inputs
- 3 – Isolation modes – Pilot Isolate, All, and Crew
- 4 – unswitched inputs
- Selectable music muting for passengers
- Selectable special intercom mode with “Alternate Intercom Mode”
- RAM (Radio Active Mute) eliminates constant back ground noise from radio static
- 2-year Pro-Support Warranty
There are no reviews yet.